Tips

Warping in 3D printing: causes and solutions

Is your 3D print coming loose at the corners or warping? Our guide explains the most common causes of warping and provides practical solutions – from the correct bed temperature...

Avoid stringing – how to print without pulling ...

Is your 3D print producing fine strings between components? This problem is called stringing . With the right retraction, temperature, and travel settings, you can easily avoid it. In our...

Checklist: What you need for your first 3D print

Get off to a successful start with 3D printing! This checklist will tell you what basic equipment you really need—from the right printer and filament to a clean print bed...

Why isn't my print sticking to the bed? – Cause...

Is your 3D print not adhering properly to the print bed? In this article, you'll learn the most common causes of poor adhesion and get practical solutions – from proper...

PLA, ABS or ASA – which filament is right for y...

PLA, ABS or ASA – which filament is right for your project? Not every filament is suitable for every application. In our comparison, we show you the differences between PLA,...